Determination of Geometry and Stress Distribution of an Optimal Stable Channel
A numerical model which determines the geometry of a threshold channel was recently developed (Diplas and Vigilar, 1992). This is important in the design of irrigation canals, channelization...
Luo, Ming
The algebraic stress model of turbulence is employed to calculate the 2-D flow field of the Gongzhui reservoir region. The discharge distribution among the discharging structures is achieved...
Scour Hole Depth Downstream of the SAF stilling Basin
A Model to predict the maximum local scour depth downstream of the SAF stilling basin is presented. The model is based on stability analysis of a particle attacked by the hydrodynamic...
Evaluation of Six Methods for the LP3 Distribution
Six frequently used estimation methods for the Log-Pearson type 3 distribution were evaluated using both the predictive and the descriptive performance indices. Ten LP3 populations and...
Discharge-Frequency Relationships in Distributary Flow Systems
The paper describes discharge-frequency relationships in distributary flow systems. The stream network that makes up the flow system is described in terms of how the various stream segments...
Urban Runoff Based on Land Use and Particle Size
As point sources have achieved pollution compliance, the focus of pollution abatement has shifted to nonpoint sources. New Federal regulations require wet-weather monitoring of drainage...
Theoretical study of unstable waves in the rapids of the river
This paper examines how the velocity distribution in free-surface flow affects the kinematic and dynamic velocities of disturbance waves on hillslopes or in high-gradient rivers, thereby...
Numerical Modelling and Laboratory Verification for the Turbulent Flow Field in the Branching Channel
Adopting the depth-averaged k-? turbulence model and using the finite volume method and SIMPLE procedure, the turbulent flow field in the branching channel is numerically solved and verified...
Design and Testing of Two Ice-Preserving Winter Lake Aeration Systems
As part of an effort to achieve ice-preserving lake aeration for winterkill prevention, two non-mixing lake aeration systems were designed and field tested. Each creates a fish refuge...
Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)
This publication, Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD), (ASCE 15-93), is applicable to buried concrete precast pipe intended...
Fire Testing of Shotcrete Samples in a Small Furnace
The fire resistance behaviour of 8 shotcrete samples were investigated in a laboratory furnace applying ISO 834 standard test. Shotcrete was applied on 20 to 30 cm thick granite slabs...
Estimating Network Model Parameters from Mail Survey Data
Network models are generally based on a four-step modeling process; trip generation, trip distribution, modal split, and trip assignment. Microcomputer implementations of these steps have...
Data Base for Seismis Rick Assessment in Mexico City
We describe a model to estimate expected ground motions and expected damage, based on intensity damage relations derived for 14 classes of buildings representative of Mexico City construction....
System Factors in LRFD Format: A Multidimensional Judgment Call
A Load & Resistant Factor Design Specification for wood buildings is being completed. The Specification contains several revisions from the traditional 'repetitive member' factor...
Drift Emplaced Waste Package Thermal Response
Thermal calculations of the effects of radioactive waste decay heat on the potential repository at Yucca Mountain, Nevada, have been conducted by the Yucca Mountain Site Characterization...
Modeling of the Ventilation for Emplacement Drift Re-Entry and Rock Drying
Different ventilation scenarios were analyzed for a hot repository with a 114 kw/Acre heat load, to determine the time required to cool a drift to the point where the temperature of the...
Investigation in 3-D of Stress Distribution in a Circular Tunnel and Vertical Emplacement Holes Due to Thermal and Overburden Loading in Tuff
Thermal stress and displacement analysis using two 3-D finite element models, one having a course mesh and one having a highly detailed mesh are presented. Results are compared to those...
Instrumentation Requirements for the ESF Thermomechanical Experiments
In situ thermomechanical experiments are planned as part of the Yucca Mountain Site Characterization Project that require instruments to measure stress and displacement at temperatures...
Experimental Synthesis of Crystalline Matrices Based on Ce, Ba, Sr Zirconates for Immobilization of High-Level Radioactive Actinides
Experimental investigations are carried out at the Radium Institute to create different by their properties crystalline matrices, alternative to SYNROC, for incorporation of partitioned...
Numerically Predicting Horizontally Oriented Spent Fuel Rod Surface Temperatures
A comparison between numerical calculations with use of commercial thermal analysis software packages and experimental data simulating a horizontally oriented spent fuel rod array was...
Return to search